Sip Trunk Setup Trix Box Install

1012

Trixbox v 2.0 with InPhonex Trunk. And you will be able to install and configure your Trixbox with our. Setup; Click Trunks; Select “Trunk SIP. This document is a guideline for configuring Spitfire SIP trunks onto Trixbox and. SIP trunk details such as. For your particular installation.

We are working on deploying a system with FreePBX 2.10.1.2 & Asterisk 1.8.16.0 using AT&T as the SIP Trunks provider. They are not sure about the compatibility on those versions of FreePBX and Asterisk with their network. AT&T states that they the versions compatible with their system are Asterisk Business Edition C.1.6.2 & Asterisk 1.4.15.

Sip Trunk Setup Trix Box Install

However, they are not sure about the versions we are using. Does anyone have any experience with this type of product with that provider. I have Googled this issue with no success, we would appreciate any input. Thank you, Francisco. Here you go Franco. Hope it helps! I took it from my install guide, and works well for us.

Box

General Settings 1. Trunk Name = ATT 2. New pokemon hack roms nds. Outbound CallerID = Whatever you want to display as your main number 3. CID Options = Allow Any CID 4. Maximum Channels= However many SIP lines you bought from AT&T 5. Disable Trunk=Nothing checked 6.

Install

Trixbox Pro

Monitor Trunk Failures= Nothing Checked Dialed Number Manipulation Rules Leave at default settings Outgoing Settings TrunkName=ATT PEER Details: type=peer qualify=2000 dtmfmode=rfc2833 host=Whatever AT&T gives you insecure=very context=from-pstn canreinvite=no nat=yes Incoming Settings Leave Blank Register String Leave Blank. NAT Settings Nat=Yes IP Configuration: Select Static IP Click Auto Configure and check the values it enters ensures that the following are entered (tweak it if you need to): External IP=The public IP address AT&T is sending the SIP to Local Neworks=Your local network address E.G.

This entry was posted on 12.10.2019.